غسالة العبوات الصغيرة Gruber KombiKEG

This Gruber KombiKEG is a semi-automatic combined keg cleaning and filling machine for kegs and one-way kegs, rated at approximately 30 kegs per hour. Cleaning, sterilisation and filling run as one automatic cycle: interval cleaning of keg wall and down tube with caustic and acid, steam sterilisation, and counter-pressure filling with differential pressure control. The machine was installed in 2017 by BRAUKON and is fed by stainless steel roller conveyors on the infeed and outfeed side
Machine type: semi-automatic combined keg washer and filler, one cleaning head / one sterilisation station / one filling head
Capacity: approx. 30 kegs/hour
Kegs: stainless steel kegs with "A" type head and one-way kegs, all common fitting systems
Functions: interval cleaning (caustic and acid), steam sterilisation, automatic filling
Filling gas: CO2 or nitrogen
Control: Siemens SIMATIC PLC, colour touch panel HMI
Detergent tank: 175 l, insulated, integrated, with steam heating coil, control valve and steam trap
Pump: 1.1 kW with electronic dry-run protection
Construction: stainless steel 1.4301, stainless steel switch cabinet, no electrical components in the wet area
Pneumatics: Festo multipole valve block, pneumatic piston valves
Dimensions: approx. 140 x 126 x H 230 cm (machine without conveyors)
Installed footprint: approx. 449 x 98 cm including the infeed and outfeed roller conveyors
Power supply: 7.5 kW max
Air supply: 2-3 bar, approx. 0.35 m³ per keg
Steam supply: 3-4 bar
Immediately available. Location: France. Dismantling, handling and truck loading are included by the seller (EXW loaded)
Overview
The machine is built entirely in stainless steel and carries one cleaning head
one sterilisation station and one filling head. Filling runs with CO2 or nitrogen. Control is a Siemens SIMATIC PLC with a colour touch panel for settings
temperature and differential pressure control
error messages and counters
It is still installed
connected and in production
and can be visited in operation on request
Technical data
Equipment
Stainless steel roller conveyors
infeed and outfeed
Steam generator
Two vent valves for fast and complete filling
Pressure switch flow line monitoring and electronic return line probe
Keg valve open control
work tables with keg stop logs
Front panel to switch between filling and CIP cleaning
Technical documentation
conformity certificate and machine layout drawing
Spare parts
Condition
Used
in production and still installed under power. Approximately 3,000 operating hours
around 90,000 kegs filled and 75,000 kegs cleaned. Last production April 2026
last maintenance January 2026. The machine is clean
maintained and ready to produce. It is being replaced by a higher capacity machine
Availability