ماكينة ثني الألواح Finn-Power EB5 2550

Angle Tolerance: ± 0°40'

Angle tolerance: �� 0��40'

Average absorbed (kW): 30

Bending angle (degrees): –135

Bending dimension tolerance (mm): �� 0,2

Bending Dimension Tolerance (mm): ± 0,2

Compressed air consumption (½", Nl/min): 12

Compressed air consumption (��", Nl/min): 12

Compressed air pressure (bar): 6

Curvature angle (degrees): ���135

diâmetro máximo de viragem: 3000

General: 3000

Leaf planarity: 10

Machine weight: 14 ton

Main switch (A): 160

Maximum bend height type SH: 200 (127 mm type N)

Maximum bending height type SH: 200 (127 mm type N)

Maximum bending length (mm):: 2550

maximum format: 1250X1250

Maximum material thickness (mm): Steel Fe 37 3.2; Stainless steel: 2.2; Aluminum: 4.0

Maximum panel diagonal: 3000

Maximum reentry curvature (mm): 55

Maximum speed: 80m/min

Maximum stack height (mm): 220

Maximum thickness: 6mm

Maximum weight allowed (kg): 3000

Maximum width between folds (mm): 160

Max number of curves per side: 20

Max. number of curves per side: 20

max stroke: 32mm

Minimum external radius: 1.5. . . 2 x sheet thickness

Minimum length between folds (mm): 350

Minimum material thickness (mm): 0,5

Minimum outer radius: 1.5. . . 2 x sheet thickness

pressing capacity: 30 ton

Sheet length, minimum maximum (mm): 370 - 2850

Sheet length, minimum (mm): 370 - 2850

Sheet width, min max (mm): 180 - 1500

Straightness and parallelism (mm): 0,6

Voltage (V): 400 (50/60 Hz)

FINN POWER EB5 2550 Cooker.

Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment.