مخفض آلية الدوران Nachi PCR-1B PCR-2B PCR-3B PCR-4B PCR-5B Series لـ حفارة

1. Product Identification
Component: Hydraulic Swing Drive Motor Assembly (Dynamic Rotation Motor)

Manufacturer Model / Series: Nachi PCR Series (PCR-1B, PCR-2B, PCR-3B, PCR-4B, PCR-5B Architecture)

Machine Compatibility:

Mini, Compact, and Medium-duty Crawler Excavators (1.0 to 12.0-ton weight classes)

Broad application across JCB, Kubota, Yanmar, Takeuchi, Bobcat, Kobelco, and Komatsu excavator lines.

Condition: Genuine Original New / Premium OEM Specification Equivalent (Complete Drop-In Unit)

System Function: Converts high-pressure hydraulic oil flow into high rotary torque to drive the excavator upper structure, boom, and cab rotation relative to the undercarriage.

2. Technical Specifications & Model Breakdown
The Nachi PCR series features a compact axial piston motor architecture integrated directly with high-torque planetary reduction gearboxes and dynamic braking logic blocks:
Motor Series,Target Machine Weight,Integrated Features,Primary Applications
PCR-1B,1.0 – 2.0 Ton,Built-in anti-reverse & dynamic parking brake,"Mini Excavators (e.g., JCB 8014, Kubota U17)"
PCR-2B,2.0 – 3.5 Ton,Shock relief valves & mechanical parking brake,"Compact Excavators (e.g., Takeuchi TB230, Yanmar VIO35)"
PCR-3B,3.5 – 5.5 Ton,Dual crossover relief & anti-cavitation check,"Mid-Mini Excavators (e.g., Kubota KX161, Bobcat E50)"
PCR-4B,5.5 – 8.0 Ton,High-pressure swash plate axial piston group,"Compact Utility Excavators (e.g., Yanmar VIO75, Kobelco SK75)"
PCR-5B,8.0 – 12.0 Ton,High-torque planetary gear reduction stage,"Midi Excavators (e.g., Komatsu PC80, JCB 85Z)"

3. Critical Installation Requirements
Motor Housing Priming (Mandatory)
Before starting the engine or operating the swing control, manually pre-fill the swing motor casing with clean, fresh hydraulic fluid through its highest case drain port. Running an axial piston motor dry—even for a few seconds—will score the swash plate, cylinder block, and piston slippers, causing immediate total failure.

Verify Case Drain Line Backpressure
Thoroughly inspect the low-pressure case drain hose back to the main hydraulic reservoir. Ensure there are no kinks, sharp bends, or restriction points. High backpressure in the case drain line will instantly blow out the main motor shaft seal.

System Air Bleeding & Startup Procedure
After mounting and pre-filling the housing, loosen the air bleed plug on top of the motor manifold. Crank the engine with the fuel supply disabled until clear, bubble-free hydraulic oil flows out, then tighten the plug. Allow the machine to idle at low RPM with zero load for 10 to 15 minutes to purge remaining air from the circuit.

Hydraulic System Decontamination
If replacing a swing motor that suffered internal mechanical breakdown, completely drain and clean the hydraulic oil reservoir, flush all control spool lines, and clean the oil cooler. Replace all return and suction filter elements prior to initial operation.

4. Frequently Asked Questions (FAQ)
Q: How do I identify whether I need a PCR-1B, PCR-2B, or PCR-3B for my machine?
A: You can identify the exact model by checking the metal ID tag stamped on the side of the motor casing or matching your machine's OEM part number. The numerical index (1B through 5B) correlates directly to frame size, displacement capacity, and mounting bolt pattern dimensions.

Q: My excavator over-swings or drifts when parked on an incline. Will replacing the swing motor fix this?
A: Yes. Swing drift or un-commanded rotation under load usually points to worn internal dynamic friction brake discs, leaking crossover shock relief valves, or scored cylinder barrel surfaces inside the motor housing. Replacing the motor assembly restores exact holding braking and precise swing control.

Q: Does the unit arrive complete with the valve manifold block installed?
A: Yes. The Nachi PCR series is supplied as a complete assembly, pre-fitted with the integrated valve manifold block containing anti-cavitation valves, crossover shock relief valves, and dynamic brake control logic.

5. Shipping & Logistics
Packaging: Preserved with anti-corrosion storage oil, fitted with plastic port caps, and bolted securely inside an export-safe wooden crate.

Transit Time: Global express air freight via DHL/FedEx/UPS typically delivers within 3 to 7 business days, with ocean freight options available for heavier bulk cargo.