ماكينة ثقب الخشب Wema Probst QBV 200






إذا قررت شراء المعدات بسعر منخفض، فتأكد أنك تتواصل مع البائع الحقيقي. اكتشف أكبر قدر ممكن من المعلومات عن مالك المعدات. تتمثل إحدى طرق الغش في تقديم نفسك كشركة حقيقية. إن ساورك شك، أخبرنا عن ذلك من أجل تشديد الرقابة وذلك من خلال نموذج التعليقات.
قبل أن تقرر القيام بالشراء، احرص على مراجعة العديد من عروض البيع بعناية لفهم متوسط تكلفة المعدات التي اخترتها. إذا كان سعر العرض الذي أعجبك أقل بكثير من عروض مشابهة، ففكر في الأمر بتأنٍ. قد يكون هناك فرق أسعار هائل يشير إلى عيوب مخفية أو أن البائع يحاول ارتكاب أعمال احتيالية.
ابتعد عن شراء المنتجات التي يكون سعرها مختلف بشدة عن متوسط السعر لمعدات مشابهة.
لا توافق على الوعود المثيرة للشكوك والبضائع المدفوعة مسبقًا. إن ساورك شك، فلا تخاف من طلب توضيح التفاصيل وأن تطلب صورًا ومستندات إضافية للمعدات وأن تفحص صحة التصديق على تلك المستندات وتطرح الأسئلة التي تساورك.
أكثر أنواع الاحتيال شيوعًا، قد يطلب البائعون غير المنصفون مبلغًا معينًا كعربون مسبق "لتحجز" حقك في شراء المعدات. وبالتالي يستطيع المحتالون تجميع مبلغًا ضخمًا ثم يختفون ولا تستطيع التواصل معهم بعد ذلك.
- إرسال الدفعة المسبقة إلى البطاقة
- لا تقم بالدفع المسبق بدون مستندات ورقية تؤكد عملية تحويل الأمول إذا ساورك أي شك في البائع خلال التواصل.
- إرسال إلى حساب "الوصي" “Trustee”
- هذا الطلب ينبغي أن يكون بمثابه إنذار فأنت على الأرجح تتواصل مع شخص محتال.
- إرسال إلى حساب الشركة باسم مشابه
- توخّ الحذر، فقد يختفي المحتالون أنفسهم أيضًا خلف شركات معلومة أو يدخلون تغييرات طفيفة على الاسم. لا تحول الأموال إذا ساورك شك في اسم الشركة.
- استبدال البيانات الخاصة في فاتورة شركة حقيقية
- قبل التحويل، تأكد أن البيانات المحددة صحيحة وأنها ترتبط أو لا ترتبط بالشركة المحددة.
معلومات الاتصال بالبائع




















Cross milling machine Wema Probst QBV 200
Used, year of construction 2020
The machine is in mint condition, less than 30 holes have been drilled.
The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs.
This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment.
Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc.
The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column.
The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out.
The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill.
Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools
Wood diameter: 60 - 200 mm
Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range
Motor capacity: 2.2 kW
Number of revolutions: 1200 rpm
Operating voltage: 400 V / 50 Hz
Transport dimensions approx. 1200 x 1400 x 2400 mm LWH
Weight approx. 380 kg
Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly
Disassembly, loading and transport by us optionally possible
Subject to errors in the description and price
To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment
Sold as is
Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee
Subject to prior sale
No warranty is given for used machines, the following applies: “purchased as viewed”
Pictures and videos serve as examples and do not represent the actual scope of delivery
Terms of payment: Prices excl. VAT, payment before collection or shipping
Terms of delivery: ex location
Our general terms and conditions apply, which can be viewed on the Internet at إظهار قائمة الأسماء
Please pay particular attention to Article 9 regarding complaints and returns!